|
The Kingston boiler
provides hot water heat in a variety of sizes
(78,000 to 235,000 heating capacity BTU/HR)
 to
serve a wide range of homes. An approved chimney is
required.
The boiler design is proven in service to be
reliable. It is easy to maintain and economical in
its purchase price and fuel consumption. The boiler
can be ordered with flame retention Beckett, Carlin
or Riello oil burners.
The boiler features a swing-open burner door that
gives full access to the combustion chamber and
burner nozzle. A split jacket provides easy access
to the flue passages of the heat exchanger. The
attractive and durable jacket is powder-coated to
resist scratching and insulated to retain heat. The
heat exchangers are constructed to meet the
standards set by the American Society of Mechanical
Engineers.
The Kingston has a wet base design in which the heat
exchanger surrounds the combustion chamber on all
sides to provide optimum heat transfer. The result
is lower fuel costs.
On the Kingston steam boiler,
 the
heat exchanger is assembled with steel push nipples
below the water line where resistance to expansion
and contraction is important, and cast iron push
nipples above the water line where corrosion
resistance is key. The cast iron push nipples are
larger than usually found on such units to provide
optimum steam quality.
Kingston�the latest in a series of designs that is
constructed for long life, convenient to install and
service, and designed to provide the most value for
each energy dollar. That's CROWN's commitment to
quality.
Special features of the
Kingston:
- Rugged wet
base cast iron heat exchanger
- Swing-open
burner door for easy service
- Choice of
three oil burners
- Attractive
split jacket easily removed for servicing
- Insulated to
save energy
- Fully
assembled, ready for installation
- Factory tested
control system
- Three physical
sizes with nine firing rates
- Combustion
chamber with a ceramic fiber target wall with
blanket
- Drain valve
- Draft
regulator
- Oil solenoid
valve
- Burner twist
disconnect plug
- Twelve year
warranty on the cast iron steam heat exchanger
- Pressure gauge
- ASME pop
safety valve
- 3" top supply
tapping for optimum steam quality
- Low water
cutoff
- Equipped with
connections to add a Mega-Stor indirect domestic
water heater
View Product Brochure and Specifications
|
